Membrane Cartridge
A Membrane Cartridge Filter is a high-efficiency filter that uses a microporous membrane media (very fine pores) to
remove extremely small particles, bacteria, and microorganisms from liquids or gases.
Membrane Slim Type Cartridge
Construction
- Media: PES / PTFE / Nylon / Polypropylene (PP) membrane
- Support Layer: Non-woven PP support
- Core, Cage & End Caps: Polypropylene
- Sealing: Silicone / EPDM / NBR / Viton
- Design: Pleated membrane structure for higher surface area
- End Type: DOE / SOE
Micron Range
- 0.1 µm
- 0.2 µm
- 0.45 µm
- 1 µm
- 5 µm
- 10 µm
- 20 µm
Key Features
- Precise and absolute micron retention
- High flow rate with low pressure drops
- Large filtration area due to pleating
- Excellent chemical compatibility
- Suitable for critical applications
- Compact design for slim housings
Ideal Applications
- RO system post filtration
- Pharmaceutical filtration
- Food & beverage processing
- Laboratory applications
- Fine chemical filtration
- Drinking water polishing
Technical Specifications
- Outer Diameter: 2.5 inch (63 mm approx.)
- Inner Diameter: 28–30 mm
- Length Options: 10”, 20”, 30”, 40”
- Maximum Operating Temperature:
- PP: 60–80°C
- PES/PTFE: up to 120°C
- Maximum Differential Pressure: 3–4 bar
- Recommended Change-Out Pressure: 1.5–2 bar
Membrane Jumbo Type Cartridge
Construction
- Media: PES / PTFE / Nylon / Polypropylene (PP) membrane
- Support Layer: Non-woven PP support
- Core, Cage & End Caps: Polypropylene
- Sealing: Silicone / EPDM / NBR / Viton
- Design: Pleated membrane for maximum surface area
- End Type: DOE / SOE
- Housing Compatibility: Big Blue / Jumbo housing (4.5″ OD)
Micron Range
- 0.1 µm
- 0.2 µm
- 0.45 µm
- 1 µm
- 5 µm
- 10 µm
- 20 µm
- 50 µm
Key Features
- High flow rate for large systems
- Absolute micron retention accuracy
- Large filtration surface area
- Low initial pressure drops
- Suitable for high-volume water treatment
- Longer service life in clean applications
- Excellent chemical and temperature resistance (based on media)
Technical Specifications (Typical)
- Outer Diameter: 4.5 inch (115 mm approx.)
- Inner Diameter: 28–30 mm
- Length Options: 10”, 20”, 30”, 40”
- Maximum Operating Temperature:
- PP: 60–80°C
- PES/PTFE: up to 120°C (model dependent)
- Maximum Differential Pressure: 3–4 bar
- Recommended Change-Out Pressure: 1.5–2 bar
Technical Specifications
- Outer Diameter: 2.5 inch (63 mm approx.)
- Inner Diameter: 28–30 mm
- Length Options: 10”, 20”, 30”, 40”
- Maximum Operating Temperature:
- PP: 60–80°C
- PES/PTFE: up to 120°C
- Maximum Differential Pressure: 3–4 bar
- Recommended Change-Out Pressure: 1.5–2 bar
Related products
Membrane Cartridge